Benin Presidential Campaign Case | S465 Mobile Stage

S595 focuses on a higher roof height. The base stage area of this model is about 168 m². The height from the stage deck to the roof is about 9 m, and the overall height from the ground to the roof is close to 11 m.
In many projects, the on-site limitation is not the stage area, but the height. When the height is insufficient, the overhead layout becomes compressed, and equipment positions become harder to arrange. This often leads to temporary layout adjustments.
The height configuration of S595 can help solve this type of limitation in advance.
When a project requires a higher suspension position or more vertical clearance under the roof, S595 is more suitable for priority comparison. It is a better option for solutions where height conditions are a key constraint.

C445 corresponds to a 40-foot standard container-size format. While keeping the container-based transport method unchanged, it provides a larger deployed stage size and noticeably improved usable space.
With this specification, the stage deck, equipment layout area, and operating route are closer to the working state of a conventional event stage. During on-site deployment, the system configuration does not need to be significantly compressed.
When a project needs to keep container-based transport while requiring a more complete usable stage scale after deployment, C445 usually offers a balanced option between size and execution feasibility.

S795 is the model with the largest stage area in the HUAYUAN mobile stage semi-trailer series. The base stage area is about 189 m², with expansion supported. The trailer body length is about 17 m.
This model is mainly designed for projects with a clear need for increased stage space.
A larger stage area allows more comfortable planning of the stage zones. The main stage, equipment layout, and personnel access routes can be arranged with more space.
When the stage area is more sufficient, the on-site team is less likely to make repeated layout adjustments due to limited space.
When your project takes stage area as the primary requirement and needs a larger stage presentation with more open on-site space, S795 is more suitable to include in the model selection range.

S465 is designed for projects with higher requirements for roof height. With the same base stage area of about 105 m², this model increases the stage deck-to-roof height to about 6 m, providing more vertical space for equipment layout.
With this height configuration, the usable space under the roof becomes more sufficient. When arranging LED screens, stage lighting, and professional audio systems, the project team can reserve more layout margin.
It also helps create a clearer visual hierarchy for the stage presentation.
If you are considering the size and stage area of S455 but also need the roof height to increase from the basic 4.7 m level to a higher level, S465 is a better model to compare first.

S565 is designed for projects with higher requirements for stage space. This model is upgraded in both length and area: the trailer body length is about 15.3 m, and the base stage area is about 168 m², with expansion supported.
The larger stage area makes it easier to arrange stage zones and is more suitable for solutions that require a more spacious layout.
S565 has the same height configuration as S465. Therefore, while keeping the same height level, it provides a larger stage area option. It is suitable for projects with a clear need to increase stage size.

ST345S is a high-load model in the ST Series. It is suitable for larger events and projects with greater equipment layout requirements.
Compared with ST315 and ST315S, ST345S provides higher load capacity and can support more equipment combinations.
The three-axle configuration makes this model more suitable for carrying heavier stage equipment and supporting longer operating periods.
During the requirement stage, it is recommended to provide the target stage opening, usable height, expected load, and equipment layout range.
If the project has higher requirements for stage area, load capacity, or equipment layout, ST345 and ST345P can also be considered.